CoilART MAGE RTA 24MM 3.5ML Stainless Steel

24mm diameter, 44mm overall height, 3.5mL juice volume, Convenient top-fill, SUS304 stainless steel, 8mm vertical four-post design, 2mm terminal post holes, Adjustable airflow, Food grade pyrex glass, Dual air tubes inside chamber, Gold-plated 510 contact, Black 510 compatible sloped derlin drip tip, 4 colors oring changeable
4.7 6
Delivery date: 3-5 days

MAGE RTA Description


The MAGE RTA's extra wide 510 sloped delrin drip tip also functions as the entire top cap to prevent your lips from making contact with a hot metal surface after some chain vaping. The 2.5mm quad wicking ports will allow users to vape at high wattages as this tank is designed to provide an RDA vape experience with the benefits of a 3.5ml juice reservoir. The MAGE RTA is a high performance platform designed to bring you to flavortown and provide great vapor production!  


MAGE RTA Features:

  • 24mm Diameter
  • 44mm Overall Height
  • 3.5ml Juice Capacity (3ml/tank, 0.5ml/chamber)
  • Convenient Top Fill
  • SUS304 Stainless Steel Construction
  • 8mm Vertical Four-Post Design
  • 2mm Terminal Post Holes
  • Three (1mm x 9mm) Ajdustable Airflow Slots
  • Four (2.5mm) Wicking Ports
  • Food Grade Pyrex Glass
  • Dual 4mm Airflow Chimneys
  • Gold Plated 510 Contact Pin
  • Black 510 Compatible Sloped Delrin Drip Tip
  • 4 Sets of Colored O-rings for Customization

MAGE RTA Package Contents:

  • (1) Stainless steel MAGE RTA by CoilArt
  • (2) Pyrex Glass Replacement
  • (3) Extra Sets of Colors of O-Rings
  • (4) Extra Set of Contact Screws




Existing reviews
This tank is amazing! Flavor is out of this world for an RTA. Vapor Production is good too. Airflow feels "open" on wide open, not quite like breathing or a restricted lung hit. Perfect. It doesn't leak, looks beautiful, and the build deck is large for its size. The only thing I'm worried about is stripping the delrin top cap/drip tip because its one piece that threads into metal. Plenty of spares included. Buy it!
Aaron | 6/17/2016 10:07 PM
Was this review helpful? Yes No (0/0)
The flavor is outstanding!!!
This tank is amazing. Easy to build on and the flavor is outstanding. Worth it
Jim | 6/28/2016 5:20 PM
Was this review helpful? Yes No (1/0)
This MAGE RTA is beast !! Fit my RX200 perfectly.Flavor is boom ! Love it !
Rubin | 6/28/2016 5:46 PM
Was this review helpful? Yes No (1/0)
I'm very impressed!
I have to say I'm very impressed! I got my mage this week and have put a couple different builds on it .  It is easier for me to build lower and run more power through the mage!
John | 6/28/2016 6:46 PM
Was this review helpful? Yes No (0/0)
Pretty good
First I will say Coil Art Gave me this RTA as part of a contest.
I am nt teh most experienced coil builder, but have been using my 3 griffin 22mm RTAs for 6 months.
As everyone says teh flavor is AMAZING.
BUt I disagree with how easy it is to build and wick and deck size.  I can easily fit a 4mm ID coil in a griffin 22mm while the largest coil I could get to fit in the mage is a 3.5mm.  But comparing the flavor to the griffin using the largest coils I can fit in both, the flavor is equal....with maybe a slight edge to the Mage. The griffin is more forgiving when you are installing your coils and easier to coil for me.  But the mage is not that hard to install a coil.  The deck holes are extremely close to the deck and airflow holes, so you have to be careful not to short out the coil while dry firing it during building.
If the post holes were slightly higher it would be easier.
The collar is a PITA to screw on.  There has to be a better way to do it then what Coil Art came up with.  It takes a few tries and may get easier every time you do it, but this was poorly thought out.  The top cap is so smooth its hard to grasp to turn it to take off and the fact its plastic or delrin or whatever and threads directly to the metal chimney concerns me.  If that chimney gets hot enough to melt the threads of the cap, you need a new cap.

Over all even though it has a few issues. Its a well built RTA that produces excellent flavor. I will most likely be using mine daily.
If you are looking for your very first RTA and are not experienced at building or wrapping coils, get a griffin or something similar first to learn on.  But if you are confident in your coil wrapping skills you should not have any issue installing and building coils for the mage.  
I would give this 5 stars if the top cap didnt thread on to the chimeny and the collar was easier to install but becuase of that I give it only 4 stars
Matt | 8/11/2016 10:06 PM
Was this review helpful? Yes No (0/0)
Love the tank
I would love to give this tank a 5 but there are some issues that prevent me. This is by far my favorite tank after 4 weeks I have been unable to go back to my rda just because I love the tank. However I do have a couple issues. 1.) The screws are absolute crap. You can strip the wrench hole where you tighten it down. I stripped the head on all of my screws by the second build. 2.) The desk is a pain in the butt to build on of you're not used to it. 3.) This tank is super sensitive so if you don't wick it probably than you've just wasted over 3ml of juice. Other than those issues this tank has amazing flavor. I would recommend this tank but I really hope coilart will fix the issues with the screw especially since this is the only site where you can get replacements and the shipping is outrageous!
Bryan | 8/26/2016 7:43 AM
Was this review helpful? Yes No (1/0)
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Product tags
Customers who bought this item also bought

MAGE RTA Colorful Drip Tips Top Cap

Reviews(2) | Orders(420)
MAGE RTA Colorful Drip Tips Top Cap ( 4pcs per pack : 2 pcs Black , 1 pcs Red , 1 pcs Blue . )

Mage Mech Black Fire Pin 1pc

Reviews(0) | Orders(260)

CoilART MAGE RTA 24MM 3.5ML Black

Reviews(2) | Orders(48)
Black,SS,Golden are avaliable